Cheapest Winchester 94 Pre-64 Stock Set (unfinished). Best value

Winchester 94 Pre-64 Stock Set (unfinished).

Winchester 94 Pre-'64 Stock Set
4.5 4.5 based on 2 reviews
Review Summary
5 Star
 
(1)
4 Star
 
(1)
3 Star
 
(0)
2 Star
 
(0)
1 Star
 
(0)

Displaying reviews 1-2
Use the scroll bar to the right to see more reviews.

4.0

10/11/2019

Mikey

Lovington, NM

  • Pros Good Value
  • Cons Fitting Required
  • Best Uses Hunting
  • Describe Yourself Hunter
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Good product

Stocks were delivered in a bubble lined envelope, stocks wrapped in bubble wrap. The butt stock had two chips at the butt plate end and the top tang area where it joins the receiver was broken on one side from crushing.The envelope also had a hole in it, I also ordered two butt plate screws and only one was in the envelope (shipped one to the small plastic envelope).Other than that the product is good. Tang fit is close but slightly undersized, just like you want. Requires overall sanding.Be aware the tang is not drilled for the mounting bolt.If you are patient, fairly good with your hands and don't mind repairing shipping damage you can end up with a nice set of stocks.

5.0

12/11/2015

Jack

Benton. Pa

  • Pros Aesthetically Pleasing, Good Value, Safe, Tough
  • Cons Fitting Required
  • Best Uses Hunting
  • Describe Yourself Gun Collector
  • Was this a gift? No
  • Bottom Line Yes, I would recommend this to a friend

Pre 64 model 94 Winchester stock set

I purchased one of these sets from another supplier for a much higher price. It was for one of two restorations I am working on. It is not a project for impatient people. It requires a good bit of fitting and attention to detail. That being said, with some patience and thinking before acting, it will come out as good, or better than the factory furniture. I removed the old furniture and started setting the individual pieces in place for test fitting. I used a fine scribe to mark the edges of the metal. After removing the marked wood, I used an orbital sander with 80 grit paper to remove the major portion of the excess on the forearm. I then used the same orbital sander with 100 grit until the lines were barely visible and finally 150 grit until the stock was smooth. I used fine metal files to trim the projections for the receiver recesses. After a number of fittings, the forearm had a better fit and appearance than the original. I did the same procedure for the stock. The only difference was that I placed the buttplate in position and screwed it in prior to marking the stock. I hand sanded the pieces with 220 grit after the last test fit The best advice I can give is be patient, take your time and think before you act. I will be purchasing my second one from Brownells.


Winchester 94 Pre-64 Stock Set (unfinished). On Sale . For folks who are seeking Winchester 94 Pre-64 Stock Set (unfinished). review. We have more information about Detail, Specification, Customer Reviews and Comparison Price. I would really like recommend that you always check the price To get a cheap price or great deal. Order your own personal Winchester 94 Pre-64 Stock Set (unfinished). from this level. You will be surprised to determine how convenient this device can be, and you will probably feel good realizing that this Winchester 94 Pre-64 Stock Set (unfinished). is one of the best selling item on today.

Summary

If you find product products sale, Shopping Deals.If at the time will discount more Savings So you already decide you want have "Winchester 94 Pre-64 Stock Set (unfinished). " for your, but you don't know where to get the best price for this Winchester 94 Pre-64 Stock Set (unfinished). . We already done the research and spend a lot of time for you. Winchester 94 Pre-64 Stock Set (unfinished).  to find out where to get the best deal on Winchester 94 Pre-64 Stock Set (unfinished). . Best buy Winchester 94 Pre-64 Stock Set (unfinished). , get low cost prices Winchester 94 Pre-64 Stock Set (unfinished). now.